Automobile & Car Parks
Automobile & Car Parks resin coatings
Wether a commercial garage or a high rise car park, Sindec products can be used to provide protection to the concrete from oils, fuels, salts and other automotive fluids in a fast paced setting with many factors of surface abuse found in this environment.
Where required, slip and wear resistant surfaces can be provided on ramps and other potential areas.
With the addition of Sindec Line Marking Paint, areas of demarcation or bay marking and information signs can be provided over the resin surface.
Flooring Solutions by Sindec
100% Solid High Build Epoxy Coating, specially formulated for industrial warehouse flooring, providing multilayer protective coating for heavily used concrete floors, in all kinds of indoor areas.
HB-300 High Build Epoxy is also suitable for parking decks, industrial store rooms, shops/commercial floors and areas where light/medium traffic is required.
Fast & simple application in industrial sites that will reduce overall project costs with its 2 coat system
It can be modified to add flexibility and/or high chemical resistance upon request. A Fast Cure option is available
For lighter traffic areas where you require good chemical resistance in a silk finish Sindec WBC-135 Water Based Colour Coating can be applied.
High Build Epoxy & WB Coatings
SELF SMOOTHING EPOXY SCREEDS
Self smoothing products are a tried and tested solution to warehousing and storage areas, due to their hard wearing, smooth uniform finish.
Ease of application and fast turn around is key in preventing excessive loss of down time and if necessary, the system can be accelerated to allow a faster cure.
Once cured demarcation lines can be added directly onto the screed to provide walkways and fire exits, etc. Available in a range of colours.
Sindec has created the ideal solution to this in SM-3000 Self Smoothing Epoxy Screed
Walkways, demarcation areas, zebra crossings, fire exits, bay marking and alphabetical or numerical characters can all be undertake with Sindec Epoxy Line Marking Paint LMP-100
Epoxy Line Marking Paint LMP
EP & WB Primers, DPM, OT & Fast Curing Options
On floor ares which show no sign of dampness, the standard EPR-221 Epoxy Primer can be used, we recommend a 2 coat application when a self smoothing screed is to be installed to ensure the substrate is fully sealed to prevent pin holing during cure.
This product is compatible with all the epoxy product line produced by Sindec Chemicals.
A fast cure option is available if desired. A Water Based Epoxy Primer AQ-130 is available for use with the water based coating systems.
If the area has a high water table or is subject to high moisture content (over 65% RH or 6% pbv) then the application of 2 coats of Sindec DPM Primer 230 may be required to retain the dampness prior to installing the self smoothing screed or epoxy system application.
For an oil contaminated surface, the application of Sindec OT-235 Oil Tolerant Primer can prevent the contamination bleeding through and affecting the subsequent system. On heavily contaminated areas, it's best to degrease, rinse and dry before applying 1 or 2 coats of the Oil Tolerant Primer. When cured will provide a barrier between the oil and the finished coating.
Explore a large number of solutions or find the right product to meet your requirements from a UK based industry leading manufacturer
Our team of chemists and production line experts are able to provide the correct solution to suit your specifications, in addition, we can provide a specification via consultation for your flooring needs. We are happy to help and deliver! Simply call today on +44 203 940 4560 or email email@example.com