top of page

Bridges &Airports

Bridges & Airports resin coatings

Contact us for a FREE quotation

Bridge decks require, wether concrete or steel, protection from the elements, they also need to provide a safe slip resistant surface for pedestrian and traffic areas. Sindec Chemicals can provide a range of solutions to resolve these problems

Airport hangars and maintenance areas require specialist protection against aggressive hydraulic oil (skydrol) and other contaminants. Sindec high Build Epoxy has been modified to withstand this.

In other areas in the airport environment, Sindec has a range of products to protect, decorate and inform  the public through demarcation lines. Contact us for further information.


Flooring Solutions by Sindec

Polyaspartic Fast Track Coating and Flake Systems

Based on Polyaspartic resin, either as a coloured coating or with a scattered overlay of PVA chips, the system provides a decorative, easy clean and chemical resistant surface ideal for clean rooms and white areas, it can be installed to floors walls and ceilings, providing a fully enveloped area, which can be sanitised to make it germ free.

The fast setting nature of Polyaspartic resin, can allow many areas to be completed in one working day, minimising down time and loss of production.

Sindec has created the ideal solution to this in PRODUCT 100 LV


Self smoothing products are a tried and tested solution to warehousing and storage areas, due to their hard wearing, smooth uniform finish. Ease of application and fast turn around is key in preventing excessive loss of down time and if necessary, the system can be accelerated to allow a faster cure. Once cured demarcation lines can be added directly onto the screed to provide walkways and fire exits, etc. Available in a range of colours.

Sindec has created the ideal solution to this in SM-3000 Self Smoothing Epoxy Screed

100% Solid High Build Epoxy Coating, specially formulated for industrial warehouse flooring, providing multilayer protective coating for heavily used concrete floors, in all kinds of indoor areas.

HB-300 High Build Epoxy is also suitable for parking decks, industrial store rooms, shops/commercial floors and areas where light/medium traffic is required.

Fast & simple application in industrial sites that will reduce overall project costs with its 2 coat system

It can be modified to add flexibility and/or high chemical resistance upon request. A Fast Cure option is available

For lighter traffic areas where you require good chemical resistance in a silk finish Sindec WBC-135 Water Based Colour Coating can be applied. 

Industrial High Build Epoxy

Walkways, demarcation areas, zebra crossings, fire exits, bay marking and alphabetical or numerical characters can all be undertake with Sindec Epoxy Line Marking Paint LMP-100

Epoxy Line Marking Paint LMP

Epoxy Concrete Repair Systems

Joint edges are often damaged and expansion points fail, leading to forklift mast damage, dropped and damaged goods and back injuries to operators.


Sindec EPR-1000 Epoxy Patch Repair Kit can repair the damage present when filled with an expansion filler can provide a smooth transition between slabs.

Spalled and damaged areas of concrete can be repaired quickly and efficiently by using Sindec EM-600 Epoxy Mortar offers 6mm to 50mm repairs with minimum downtime.

EP & WB Primers, DPM, OT & Fast Curing Options

On floor ares which show no sign of dampness, the standard EPR-221 Epoxy Primer can be used, we recommend a 2 coat application when a self smoothing screed is to be installed to ensure the substrate is fully sealed to prevent pin holing during cure.


This product is compatible with all the epoxy product line produced by Sindec Chemicals.

A fast cure option is available if desired. A Water Based Epoxy Primer AQ-130  is available for use with the water based coating systems.

If the area has a high water table or is subject to high moisture content (over 65% RH or 6% pbv) then the application of 2 coats of Sindec DPM Primer 230 may be required to retain the dampness prior to installing the self smoothing screed or epoxy system application.

For an oil contaminated surface, the application of Sindec OT-235 Oil Tolerant Primer can prevent the contamination bleeding through and affecting the subsequent system. On heavily contaminated areas, it's best to degrease, rinse and dry before applying 1 or 2 coats of the Oil Tolerant Primer. When cured will provide a barrier between the oil and the finished coating.

Explore a large number of solutions or find the right product to meet your requirements from a UK based industry leading manufacturer 

Our team of chemists and production line experts are able to provide the correct solution to suit your specifications, in addition, we can provide a specification via consultation for your flooring needs. We are happy to help and deliver! Simply call today on +44 203 940 4560 or email


Do you want a FREE quotation on one of our systems or simply need more information?

bottom of page