top of page

Medical & Healthcare Workspaces

Medical &
resin coatings

The healthcare and medical industries work non-stop around the clock 24/7. The floor is a prime area of concern for medical facilities, as contaminants can easily be trafficked around underfoot, getting the floor finish right is therefore essential for these sites who which to maintain the high standards of cleanliness.

The main requirements for floors in such an environment, is they can be fast and effectively cleaned and sanitised, thus, a seamless, smooth and impervious floor is essential. the floors needs to maintain these properties through the challenge of constant traffic from staff, patients and wheeled equipment as well as affording protection from liquid spills and corrosive substances.

if the floor fails, it will become difficult to clean which could lead to the accumulation of germs and bacteria and other possible contaminants, Sindec Chemicals offers solutions which can be found below.

medical healthcare hospital resin coatings

Flooring Solutions by Sindec

Polyaspartic Fast Track Coating and Flake Systems

Based on Polyaspartic resin, either as a coloured coating or with a scattered overlay of PVA chips, the system provides a decorative, easy clean and chemical resistant surface ideal for clean rooms and white areas, it can be installed to floors walls and ceilings, providing a fully enveloped area, which can be sanitised to make it germ free.

The fast setting nature of Polyaspartic resin, can allow many areas to be completed in one working day, minimising down time and loss of production.

Sindec has created the ideal solution to this in PRODUCT 100 LV

100% Solid High Build Epoxy Coating, specially formulated for industrial warehouse flooring, providing multilayer protective coating for heavily used concrete floors, in all kinds of indoor areas.

HB-300 High Build Epoxy is also suitable for parking decks, industrial store rooms, shops/commercial floors and areas where light/medium traffic is required.

Fast & simple application in industrial sites that will reduce overall project costs with its 2 coat system

It can be modified to add flexibility and/or high chemical resistance upon request. A Fast Cure option is available

For lighter traffic areas where you require good chemical resistance in a silk finish Sindec WBC-135 Water Based Colour Coating can be applied. 

High Build Epoxy & WB Coatings


Self smoothing products are a tried and tested solution to warehousing and storage areas, due to their hard wearing, smooth uniform finish.


Ease of application and fast turn around is key in preventing excessive loss of down time and if necessary, the system can be accelerated to allow a faster cure.


Once cured demarcation lines can be added directly onto the screed to provide walkways and fire exits, etc. Available in a range of colours.

Sindec has created the ideal solution to this in SM-3000 Self Smoothing Epoxy Screed

EP & WB Primers, DPM, OT & Fast Curing Options

On floor ares which show no sign of dampness, the standard EPR-221 Epoxy Primer can be used, we recommend a 2 coat application when a self smoothing screed is to be installed to ensure the substrate is fully sealed to prevent pin holing during cure.


This product is compatible with all the epoxy product line produced by Sindec Chemicals.

A fast cure option is available if desired. A Water Based Epoxy Primer AQ-130  is available for use with the water based coating systems.

If the area has a high water table or is subject to high moisture content (over 65% RH or 6% pbv) then the application of 2 coats of Sindec DPM Primer 230 may be required to retain the dampness prior to installing the self smoothing screed or epoxy system application.

For an oil contaminated surface, the application of Sindec OT-235 Oil Tolerant Primer can prevent the contamination bleeding through and affecting the subsequent system. On heavily contaminated areas, it's best to degrease, rinse and dry before applying 1 or 2 coats of the Oil Tolerant Primer. When cured will provide a barrier between the oil and the finished coating.

Explore a large number of solutions or find the right product to meet your requirements from a UK based industry leading manufacturer 

Our team of chemists and production line experts are able to provide the correct solution to suit your specifications, in addition, we can provide a specification via consultation for your flooring needs. We are happy to help and deliver! Simply call today on +44 203 940 4560 or email


Do you want a FREE quotation on one of our coating systems or simply need more information?

bottom of page